Edtiske extender comes with the 1200Mbps dual-band WiFi range extender. To extend the range of existing WiFi router signals, you can set up this device at your home or office. It covers an area up to 10000 sq.ft. Edtiske extender comes with 4 high gain antennas. To get to know more information about an extender, read this page's entire information. 

Benefits To Purchase & Locate Extender

By connecting the extender with the router, you can enjoy numerous benefits. Such as:- 

  • Helps to remove all dead zone areas of the office & house. 

  • Easy to install with a router. 

  • Get support 24x7. 

  • Purchase an Edtiske extender at an affordable price. 

  • Do setup easily just by pushing the WPS button. 

Things To Remember During Extender Setup 

Location-Location-Location:- 

The location or placement of an extender should be between your host router and the area where you want WiFi network coverage. Must avoid placing metal or electronic obstacles closer to an extender and router. We recommend you to try to locate an extender at the similar height as the main router which can help with signal reception. 

Plug In Socket And Connect With Computer

Prior place the Edtiske extender power button in the working electrical socket. After that, wait until extender completes the booting process. Now, take a computer or laptop and open WiFi search. Look for the extender default WiFi network and connect any WiFi device with it. 

Do Ethernet Connection:- 

If your router does not have a WPS button, then you will need to do an ethernet connection. For this, insert cable one end in Edtiske extender ethernet port and another end of cable in computer ethernet port. 

Setup Edtiske Extender By WPS

The WiFi protected setup method is simple and uncomplicated to pair the extender with the main router. 

  • Push the existing router WPS button. 

  • Within the next 2 minutes press Edtiske extender WPS button. 

  • Further, wait for a successful connection.

  • Once the extender is attached with the main router, the WPS LED and router LED should turn into solid green or blue. 

Note:- For this setup method your existing router must have a WPS button. If the router does not have a WPS button, then you can't do the Edtiske extender setup by this method. 

Edtiske Extender Configuration By Ethernet Wire:- 

Do Hardware Connection:- 

  • In power socket, near router plug in Edtiske extender. 

  • After that, take the ethernet cable and insert the ethernet cable to the ethernet port. 

  • Then, connect the remaining end of ethernet wire to laptop or computer ethernet port. 

Note:- During the setup process, it is essential to disconnect your WiFi device from all other wireless networks. 

Visit At Configuration Page:- 

  • On a computer, open the browser. 

  • Enter the Edtiske extender IP address in the URL bar. 

  • Further, fill in default username & security password 

  • After visiting the login page, select the wired mode option. 

  • Consider all the display information step by step. 

  • Next, save all the changes once the extender is configured. 

  • At last, verify an internet connection by connecting your WiFi device with the Edtiske extender network. 

Apart are the two methods of Edtiske extender configuration process with router. If you fail to connect the extender to the router, then try below solution tips. 

Tips To Fix Extender Setup Error

There are numerous ways to fix Edtiske extender configuration process issues. Look up below:- 

Check Edtiske Extender Placement

Lookup that placement of an extender is perfect and closer to the main router. Also ensure that the extender is not placed near electronic gadgets. 

Update Extender Software

Early, take the computer (Make sure that computer must be linked with the default extender WiFi network) and open chrome. Now go to the extender default website, and fill in login page details. After that, hit the software upgrade option and install the pending or latest software file if any one is there. Installation process of the latest software takes 15 to 20 minutes to complete. 

Try To Restart Edtiske Extender

We suggest you try to take out the extender main plug from the socket and wait for 2 minutes to plug it back again into the socket. After that, try to connect the extender with a router or WiFi device. If issues still persist then try another method. 

Reset All Factory Default Settings

To reset all factory default settings, push the reset button of an extender with a paper pin for 10 seconds. By doing this all LEDs of an extender turned off. All off LEDs of Edtiske 1200Mbps WiFi range extender stays that the unit is now completely reset. 

Note:- After extender resetting, do Edtiske extender setup process again. 

Now, we can hope after the entire directions of this article helps you to connects Edtiske extender with host router. Facing issue at configuration time, then remove it quickly by following solution tips. In case, do you fail to fix the issue then try to contact our Edtiske customer care support.